To raise fish and aquatic plants in the aquarium, How to clean a fish tank the aquarium must clean and maintained regularly.
If you don’t clean the aquarium properly, the aquarium itself may damage, so learn the correct cleaning method.
What causes the aquarium to get dirty?
Most of the dirt in the aquarium is ” moss. ” Why does the aquarium get moss in the first place?
The cause of moss is ” eutrophication ” and ” light ” in the aquarium.
“Eutrophication” that causes moss
Eutrophication is a condition in which proteins and organic matter dissolved in the water in the aquarium.
Proteins and organic matter refer to fish waste and excrement and food that fish cannot eat.
If you put too much fish in the aquarium or feed too much, the aquarium will become “eutrophicated.”
“Light” that causes moss
Furthermore, the “light” that enters the aquarium causes the moss to grow and become more likely to grow.
If the lighting is too strong, the lighting is on for too long, or the distance between the lighting and the aquarium is too close, moss will grow quickly.
Daily aquarium cleaning “moss cleaning.”
So how do you clean up when moss grows? Cleaning the moss is a simple cleaning that rubs the surface of the aquarium.
Depending on the tool you use, it may scratch, so use the best tool for cleaning.
How to clean the moss in a glass aquarium: How to clean a fish tank
If the aquarium is made of glass, you can either clean it with a scraper or a magnet.
Clean with a scraper
In the case of a glass aquarium, use a scraper like the one shown in the photo to scrape off the moss.
It recommends using a scraper blade made of metal because it is easy to remove moss and work.
If you don’t have a metal scraper, you can use the triangle ruler you have at home (even if you sell it at 100%).
Clean with a magnet
There is a tool for cleaning moss on the market with a magnet and sponge, as shown in the picture.
The magnet cleaner cleans the inside and outside of the aquarium by sandwiching it with a magnet.
You don’t have to put your arm in the aquarium, and it’s easy to clean, but you have to make sure that the sponge doesn’t get caught in the sand.
If sand gets caught, even glass that is hard to scratch may scratch by the sand, so be careful.
Rub the corners with a toothbrush
In the glass aquarium, the glass bonded to each other with silicon, so if the bonded part scrapes with a scraper, etc., the silicon may damage.
Be sure to rub the corners with a toothbrush gently.
How to clean the moss in an acrylic aquarium
If the aquarium material is acrylic, it is more easily scratched than glass, so you need to more careful.
Basically, clean with a sponge, not a scraper.
At that time, be careful not to use a melamine sponge. Using a melamine sponge will scratch the acrylic aquarium.
If it’s hard and the moss doesn’t come off easily, you can use a scraper, but be sure to use one with a resin blade.
If you use a metal one, the aquarium will scratch.
Avoid using magnet cleaners as they can easily scratch the aquarium.
How often should moss be cleaned?
As mentioned above, the causes of aquarium pollution are “eutrophication” and “light.” Therefore, the frequency of getting dirty varies considerably depending on the environment of the aquarium.
In the first place, even if moss grows in the aquarium, it does not do anything wrong. If you don’t mind, you can leave it alone.
But you don’t want to see the laid-out aquarium with moss at all.
Moss cleaning is done to ” keep the appearance beautiful ” of the aquarium.
How often should it be done? It doesn’t matter if you’re worried about dirt. Whether it’s daily or once a year, it’s not a mistake.
Routine aquarium maintenance “water change.”
In a general aquarium, harmful substances discharged from fish and not decomposed accumulate in the aquarium, and the water environment deteriorates.
Therefore, it is necessary to change the water in the aquarium regularly.
How often should water be changed?
The frequency of water changes will vary depending on the type of fish you are raising and the size of the aquarium, but as a guide, change the water to ” 1/3 of the amount of water in two weeks “.
If you are feeling well at this frequency, you can continue as it is, or while watching the state of the aquarium, such as “1/5 of the amount of water in 2 weeks” or “1/3 of the amount of water in 3 weeks”. You may find a well-balanced frequency of water changes that you can easily change.
How to change the water: How to clean a fish tank
In the case of a seawater aquarium, prepare seawater, and in the case of a freshwater aquarium, prepare neutralized water by descaling.
It is advisable to use commercially available artificial seawater or descaling agents.
When changing water, it is important to adjust the water temperature and salinity to the water quality in the aquarium.
If you put water of different quality into the aquarium, the fish may die. Be
sure to prepare water with the same water quality in advance.
We will drain 1/3 of the amount of water. When changing water to about 1/3 of the amount of water, you can leave the fish in the aquarium as it is.
With the entire hose in the aquarium, block one of the entrances.
If you take the blocked hose out of the water tank and drain it into a bucket placed below the hose in the water tank, you can easily drain it using the siphon principle.
Draining can be done more easily by using a bath pump for the bath.
It recommends attaching the tape to the 1/3 water volume line in advance to understand the amount of drainage easily.
Creating artificial seawater, adjusting the water temperature, and changing water are quite troublesome tasks.
Some aquariums allow you to raise fish without changing water, so it’s a good idea to use such an aquarium.
Cleaning the pipes and hoses attached to the aquarium: How to clean a fish tank
Daily care is cleaning moss and changing water, but if you are concerned about dirt, clean the pipes and hoses as well.
How to clean pipes and hoses
Clean the plumbing and hoses with a commercially available pipe brush or toothbrush, as shown in the picture.
Remove the removable items, wash them thoroughly with water, and then put them back in place.
Cleaning of filtration equipment and filter media
Clean the filter and filter media once every 3 to 6 months.
There is a manufacturer-specified replacement guideline for the filter media, so replace it according to the manufacturer’s replacement period.
Cleaning method for filtration equipment and filter media
First, remove any peripheral equipment such as pipes and coolers that connect to the filtration device.
Put the filter material in a bucket and rinse it.
When washing the filter media, it recommends to wash it with breeding water not to kill the bacteria.
Drain the water from the filter and wash the filter.
When disposing of water from the filtration device, you can easily dispose of it using a drainage pump.
Put the descaled water in the filter and replace the washed filter media and peripheral equipment.
Cleaning the bottom sand: How to clean a fish tank
The sand on the bottom of the aquarium can collect dirt, so be sure to clean it once every few months.
How to clean the bottom sand
Lightly stir the bottom sand with a stick or disposable chopsticks, and when dirt comes up, use a dropper to suck out the dirt.
For those who want to make cleaning and maintenance easier
Proper cleaning and maintenance are essential for raising fish in an aquarium.
I want to make cleaning and maintenance easier!
If so, please consider a water tank that does not require water change, filter tank, or filter media.
By reproducing the same mechanism as the natural sea in the aquarium and detoxifying all harmful substances in the aquarium with bacteria, it is a mechanism that allows fish to breed without a filtration tank or water change.
We sell aquariums that do not require water changes, so please feel free to contact us.
Read Also: Difference between molecule and compound